AQQA 3W Dual Outlet Aquarium Air Pump

The AQQA aquarium air pump is a 3 watt aerator with two stainless steel outlets. AQQA lists a maximum air volume of 100GPH and a max pressure of 18Kpa, enough for tanks up to 80 gallon. A knob on top adjusts the air or switches it off, so you do not need to pull the plug during feeding or maintenance.

Built to stay quiet

The pump uses a double-layer structure with a thickened casing, and four soft rubber pads sit underneath. AQQA states the max noise does not exceed 35dB. The pads also stop the pump from walking across a shelf as it vibrates.

Stainless steel outlets

Most budget pumps use plastic nipples that can crack when tubing is pulled on and off. Steel outlets hold up better over years of maintenance, and they suit both freshwater and seawater setups.

In the box

• Air pump with a 5.91ft power cord
• 2 air stones
• 2 air tubes of 4.92ft
• 2 check valves
• User manual

Using the knob

Switching off the air during feeding keeps flakes from being blown under decor. Turn it back on afterward. Many keepers also lower output at night in planted tanks to hold more carbon dioxide in the water.

Good matches

With 100GPH split across two outlets, it can drive a pair of mid-size sponge filters, a long air stone or a bubble disc. Pair it with an AQUANEAT large sponge filter for cheap, gentle filtration.

Support

AQQA offers a 1-year after-sale product service and round-the-clock customer service.

Setup tips

Keep the pump above the water line, fit both check valves toward the tank, and replace air stones when bubbles turn coarse. If you need more tubing, see AQUANEAT airline tubing.

If you only need one line, cap the second outlet with a short piece of tubing and a closed valve.